Toshiba e-STUDIO281c Service Handbook page 518

[402F] Page memory size error
This error occurs when the expansion memory is not installed or the expansion memory has an abnor-
mality.
Check if the expansion memory exists or not, or it is correctly installed.
[4031] HDD full failure during printing
Reduce the number of pages of the job in error and perform the job again.
Check if the server or local disk has a sufficient space in disk capacity.
[4032] Private-print-only error
Select "Private", and then perform the printing again.
[4033] Printing data storing limitation error
Select "Print", and then perform the printing again.
[4034] e-Filing storing limitation error
Select "Print", and then perform the printing again.
[4035] Local file storing limitation error
Select "Remote" (SMB/FTP) for the destination of the file to save.
[4036] User authentication error
Perform the authentication or register as a user, and then perform the printing again.
[A221] Print job cancellation
This message appears when deleting the job on the screen.
[A222] Print job power failure
When there are running jobs, perform the job in error again after the completion of the running jobs.
If the error still occurs, turn the power OFF and then back ON, and perform the job again.
[A290] Limit over error (black)
[A291] Limit over error (black)
[A292] Limit over error (black)
Clear the limit counter (black).
[A2A0] Limit over error (color)
[A2A1] Limit over error (color)
[A2A2] Limit over error (color)
Clear the limit counter (color).
e-STUDIO281c/351c/451c © 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
TROUBLESHOOTING
5 - 112