Toshiba e-STUDIO281c Service Handbook page 140

Classifi-
Code
cation
462 RADF Setting for switchback
operation in mixed-size
copying using RADF
463-0 Paper Feeding retry
feeding number set-
ting (upper
463-1
drawer)
e-STUDIO281c/351c/451c
ERROR CODE AND SELF-DIAGNOSTIC MODE
Setting mode (08)
Func-
Items
tion
ALL
Plain ALL
paper
Others ALL
2 - 118
Default
<Accept-
RAM
able
value>
0 SYS This setting is whether
<0-2> the original length is
detected or not by
transporting without
scanning in reverse
when A4-R/FOLIO
paper or LT-R/LG paper
is detected in a mixed-
size copying.
0: Disabled -
AMS:
A series - Judges as
A4-R without trans-
porting in reverse
with no scanning.
LT series - Judges
whether it is LT-R or
LG by its length
without transporting
in reverse with no
scanning.
APS:
A series - Judges
whether it is A4-R or
FOLIO without
transporting in
reverse with no
scanning.
LT series - Judges
whether it is LT-R or
LG without trans-
porting in reverse
with no scanning.
1: Enable 1
AMS:
A series - Judges
whether it is A4-R or
FOLIO by transport-
ing without scanning
in reverse to detect
its length.
LT series - Judges
whether it is LT-R or
LG by transporting
without scanning in
reverse to detect its
length.
APS:
The same as that of
APS in 0: Disabled.
2: Enable 2
AMS/APS:
The same as that of
AMS in 1: Enable 1.
5 M Sets the number of
<0-5> times of the feeding
retry from the upper
5 M
drawer.
<0-5>
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Pro-
Contents cedur
e
1
4
4