Toshiba e-STUDIO281c Service Handbook page 29

Error code Classification
ED10 Finisher jam
ED11
ED12
ED13
ED14
ED15
ED16
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Contents
Skew adjustment motor (M1) home position detec-
tion abnormality: The Skew adjustment motor is not
at the home position. [MJ-1101 (when MJ-6101 is
installed)]
Sideways adjustment motor (M2) home position
detection error: The Sideways adjustment motor is
not at the home position. [MJ-1101 (when MJ-6101
is installed)]
Shutter home position error: The shutter is not at
the home position. [MJ-1101]
Front alignment plate home position error: The front
alignment plate is not at the home position. [MJ-
1101]
Rear alignment plate home position error: The rear
alignment plate is not at the home position. [MJ-
1101]
Paddle home position error: The paddle is not at the
home position. [MJ-1101]
Buffer tray home position error: The buffer tray is
not at the home position. [MJ-1101]
2 - 7
Troubleshooting
P. 5-48
P. 5-48
P. 5-49
P. 5-49
P. 5-50
P. 5-50
P. 5-51
e-STUDIO281c/351c/451c
ERROR CODE AND SELF-DIAGNOSTIC MODE
2