Configuration Of Options - Toshiba e-studio 2822AM User Manual

1.PREPARATION
9. USB terminal (4-pin)
Connect to your PC using a commercially available USB cable.
 Use a USB2.0 Hi-Speed certified cable: USB cable supporting the USB2.0 Hi-Speed mode (480 Mbps of transfer
speed) certified by the USB Implementers Forum.
 Connect the equipment with a PC directly by the USB cable. When it is connected with a PC via a USB hub, the
equipment may not be recognized.
10. LINE (Only for e-STUDIO2822AF)
Connect to the public switched telephone network.
For details on how to use the Fax functions, see the following manual.
Fax Guide
11. Scanning area
The data of originals transported from Reversing Automatic Document Feeder are scanned here.
 P.206 "Regular Cleaning"
12. Original scale
Confirm the size of an original placed on the original glass.
13. Platen sheet
 P.206 "Regular Cleaning"
 Configuration of options
The available options are listed below. Contact your service technician or service representative for details.
12 Components
Main body
Wireless LAN Module
(GN-1160)