Toshiba e-STUDIO281c Service Handbook page 281

(4) Make an adjustment in the order of step 1
and 2.
Step 1
In case of A:
Tighten the mirror-3 adjustment screw (CW).
In case of B:
Loosen the mirror-3 adjustment screw
(CCW).
Step 2
In case of C:
Tighten the mirror-1 adjustment screw (CW).
In case of D:
Loosen the mirror-1 adjustment screw
(CCW).
(5) Apply the screw locking agents to the adjustment screws. (2 areas)
• Recommended screw lock agent
Manufacturer: Three Bond
Product name: 1401E
The following adjustments (b) to (e) should be performed with Test Chart No. TCC-1. (Refer to
page 3-19.)
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved
Adjustment screw for the mirror-3 ( Rear )
Fig. 3-5
Adjustment screw
for the mirror-1 ( Rear )
Fig. 3-6
3 - 15
Carriage-2
Carriage-1
e-STUDIO281c/351c/451c
ADJUSTMENT
3