3.7.5
Judgment threshold for ACS
The judgment level is adjusted for the automatic identification of whether the original set on the glass is
black or color. Namely, this is to adjust the judgment level used when "Auto Color" is selected at color
modes. The adjustment is available for both the manually-set original and the original used with the
RADF.
Code
Item to be adjusted
1065
Judgment threshold
for ACS when origi-
nal is set manually
1066
Judgment threshold
for ACS when origi-
nal is set on RADF
<Procedure>:
Procedure is same as that of "3.7.2 Density adjustment (Black Mode)".
3.7.6
Sharpness adjustment
If you want to make scan images look softer or sharper, perform the following adjustment. The adjust-
ment can be made for each of the color modes and original modes independently.
Code
Color mode
1086
Full Color
1087
1088
840
Black
841
842
843
Gray Scale
Note:
Note:
You have to make adjustment by balancing between moire and sharpness.
<Procedure>
Procedure is same as that of "3.7.2 Density adjustment (Black Mode)".
e-STUDIO281c/351c/451c
ADJUSTMENT
The larger the value is, the more an original tends to be judged as black even
at the Auto Color Mode. The smaller the value is, the more it tends to be
judged as color.
Acceptable values: 0 to 255 (Default: 70)
Original mode
Text
•
The larger the value is, the sharper the image becomes;
while the smaller the value is, the softer the image becomes.
Printed Image
•
The smaller the value is, the less moire tends to appear.
Photo
•
The acceptable values are 0 to 31.
The center value is 16.
Text/Photo
However, 0 is equivalent to the center value.
Text
Photo
-
3 - 44
<Adjustment Mode (05)>
Contents
<Adjustment Mode (05)>
Contents
© 2005 - 2008 TOSHIBA TEC CORPORATION All rights reserved