Removing The Developing Cylinder Side Seal - Canon NP6218 Service Manual

CHAPTER 4 IMAGE FORMATION SYSTEM
3) Place a newspaper or the like on the floor or a desk top, and pour out the toner from
the developing assembly.
4) Remove the two screws
* consisting of the blade and its mount.

3. Removing the Developing Cylinder Side Seal

1) Remove the developing assembly from the copier.
2) Remove the blade assembly.
Caution:
The blade must be installed at high precision. Do not remove it in the field. If
necessary, remove it intact on its mounting plate.
3) Remove the screw
4-48
, and remove the blade assembly*
Figure 4-331
, and remove the front cover
Figure 4-332
COPYRIGHT © 1997 CANON INC.
.
CANON NP6218 REV. 0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
.