Table of Contents
Advertisement
47
Quality of Service (QoS) Commands
Command Mode
Interface (Ethernet, Port Channel) Configuration mode
User Guidelines
Use the default CoS value to assign a CoS value to all untagged packets entering
the interface.
Example
The following example defines the port
1 default CoS value as 3.
gi1
switchxxxxxx(config)# interface gi11
switchxxxxxx(config-if)#
qos cos
3
47.32 qos dscp-mutation
Use the qos dscp-mutation Global Configuration mode command to apply the
DSCP Mutation map to system DSCP trusted ports. Use the no form of this
command to restore the trusted port with no DSCP mutation.
Syntax
qos dscp-mutation
no qos dscp-mutation
Parameters
N/A
Default Configuration
Disabled
Command Mode
Global Configuration mode
User Guidelines
Apply the DSCP-to-DSCP-mutation map to a port at the boundary of a Quality of
Service (QoS) administrative domain. If two QoS domains have different DSCP
955
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
Advertisement
Table of Contents
