Fixing Drive System; Outline - Canon GP605 Service Manual

II . FIXING DRIVE SYSTEM
A.

Outline

The fixing drive system is controlled for the following:
[1] Drive of the fixing roller.
[2] Drive of the cleaning belt.
[3] Drive of the fixing inlet guide.
[4] Drive of the thermistor reciprocating mechanism.
[5] Drive of the upper separation claw reciprocating mechanism.
Issues an error upon
detection.
J508B
Drive signal
J508A
Figure 8-201 Construction of the Control System
COPYRIGHT © 1999 CANON INC.
Detection signal
Detection signal
Cleaning belt drive solenoid
Drive signal
M1
Main motor
Drive signal
CANON GP605/605V REV.0 JAN. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
Indicates that the cleaning
belt is running out on the
control panel upon detection.
PS7
Web absent sensor
Upper
separation
claw
Inlet guide drive solenoid
CHAPTER 8 FIXING SYSTEM
PS8
Web absent
warning sensor
Thermistor
M3
Fixing roller
motor
8-5