Removing Punch Waste - Canon CLC5151 Reference Manual

8
Close the front cover of the finisher.
CAUTION
When closing the front cover of the finisher, be careful not to get your fingers caught,
as this may result in personal injury.
IMPORTANT
When you have replaced the staple cartridge, be sure to manually reposition the staples in the
saddle stitcher unit. (See "Saddle Stitch Staple Repositioning," on p. 4-66.)

Removing Punch Waste

When the punch waste tray of the optional Puncher Unit-AG1 becomes full, a screen similar to
the one shown below appears on the touch panel display. Follow the procedure described below
to remove the punch waste.
NOTE
This procedure is necessary only if the optional Puncher Unit-AG1 is attached.
Finisher-W1/Saddle Finisher-W2/Puncher Unit-AG1 (Optional)
7
7-29