Remove Background - Canon Color imageRUNNER C3480 Sending And Facsimile Manual Sending And Facsimile Manual

Remove Background

This mode enables you to scan by erasing the background color of the original. This
mode is especially useful for scanning originals, such as catalogues and paper, that
have turned yellow from age.
1
Place your originals and specify the destination ➞ press the
Scan Settings drop-down list ➞ [Option] ➞ [Special Features]
➞ [Image Qual. Adjustment].
For more information on specifying the destination, see Chapter 2, "Basic
Sending Methods."
2
Press [Remove Background] ➞ [OK].
If the background color remains, or if you want to make the background color
darker when the original is scanned in the Remove Background mode, make fine
adjustments to the density of the background color.
If you want to make fine adjustments to the density of the background color,
press [Fine Adjustment] ➞ press [-] or [+] to specify the amount of each color
that you want to adjust ➞ press [OK].
For example, if the background color (yellow) of the original remains, press [-]
next to <Yellow> to adjust the density.
Adjusting Yellow automatically adjusts the levels of Red and Green to the same
level as Yellow. However, adjusting the levels of Red or Green sets Yellow back to
its default level.
NOTE
•
You can adjust the density of each color by pressing [-] or [+]. Press [-] to make the
color lighter, or press [+] to make the color darker.
•
If you make fine adjustments to the density, the automatic scan exposure setting is
canceled, and the original is scanned according to the Fine Adjustment settings.
Image Quality Adjustment
4
4-15