Conforming To Ec Directive - Omron SYSDRIVE 3G3JVS ERIES User Manual

Design

2-2-6 Conforming to EC Directive

The following description provides the wiring method of the Inverter to meet EC Directive
requirements. If the following requirements are not satisfied, the whole equipment incor-
porating the Inverter will need further confirmation.
H Standard Connection
D Main Circuit Terminals
MCCBs
3-phase 200 V AC
Single-phase 200 V AC
3-phase 400 V AC
D Control Circuit Terminals
Forward/Stop
Multi-function input 1 (S2)
Multi-function input 2 (S3)
Multi-function input 3 (S4)
Multi-function input 4 (S5)
Sequence input common
Frequency reference power
supply at +12 V
Frequency reference input
FREQ
adjuster
Frequency reference common
(2 kΩ, 1/4 W min.)
Note I/O signals can be connected to a single shielded cable.
2-28
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Noise Filter
Chapter 2
Clamp core
Multi-function contact output
NO
NC
Common
Analog-monitor output
Analog monitor output common