F. Drive System Belt Layout
The copier's drive belts include the
following:
[1] belt for the developing assembly,
registration roller, attraction roller, and
photosensitive drum cleaner
[2] belt for the multifeeder pickup assembly
G. Drum Motor Assembly
1. Removing the Drum Motor (M2)
1) Remove the photosensitive drum unit.
2) Remove the rear cover.
3) Remove the flywheel.
4) Remove the potential control PCB.
5) Remove the two screws [1], and detach
the drum motor flywheel [2].
6) Remove the two screws [3].
COPYRIGHT © 1999 CANON INC.
CHAPTER 9 EXTERNALS / AUXILIARY MECHANISMS
CANON CLC1120/1130/1150 REV.0 MAR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
[2]
Figure 9-724
[1]
Figure 9-725
[3]
[3]
Figure 9-726
[1]
[2]
9-27