Removing The Blank Shutter Motor; Routing The Blank Shutter Cable - Canon NP6330 Service Manual

5. Removing the Blank Shutter Motor

1) Remove the blank exposure lamp assembly.
2) Remove the blank exposure assembly upper plate. (See 2. "Removing the Blank
Exposure Lamp.")
3) Remove the two screws
shutter motor

6. Routing the Blank Shutter Cable

Windtwice
COPYRIGHT © 1997 CANON INC.
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
, and disconnect the connector
by moving it in the direction of the arrow.
Figure 4-317
Windtwice
Figure 4-318
CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 4 IMAGE FORMATION SYSTEM
; then, remove the blank
Slide shutter
4-33