Preparing The Site For Services Gateway Installation; Site Preparation Checklist; Table 22: Site Preparation Checklist - Juniper SRX 5600 Hardware Manual

Chapter 3
Preparing the Site for Services Gateway
Installation

Site Preparation Checklist

Table 22: Site Preparation Checklist

Item or Task
Verify that environmental factors such as
temperature and humidity do not exceed
services gateway tolerances.
Select the type of rack or cabinet.
Plan rack or cabinet location, including required
space clearances.
If a rack is used, secure rack to floor and
building structure.
Acquire cables and connectors.
Locate sites for connection of system
grounding.
This chapter describes how to prepare your site for installation of the SRX 5600
services gateway. It discusses the following topics:
Site Preparation Checklist on page 37
Cabinet Requirements on page 38
Rack Requirements on page 39
Clearance Requirements for Airflow and Hardware Maintenance on page 40
The checklist in Table 22 on page 37 summarizes the tasks you need to perform
when preparing a site for services gateway installation.
For More Information ...
"Services Gateway Environmental
Specifications" on page 183
"Cabinet Requirements" on page 38,
"Rack Requirements" on page 39
"Cabinet Size and Clearance
Requirements" on page 38
"Rack Size and Strength" on page
39"Clearance Requirements for
Airflow and Hardware Maintenance"
on page 40
"Connection to Building Structure"
on page 40
"DC Power Grounding Requirements
and Warning" on page 174
Performed By Date
Site Preparation Checklist
37