Replacing A Routing Engine; Figure 49: Installing An Scb - Juniper SRX 5600 Hardware Manual

SRX 5600 Services Gateway Hardware Guide

Figure 49: Installing an SCB

Replacing a Routing Engine

The routing engine is located within the SCBs in the slots located at the horizontally
along the bottom of the chassis marked
To replace the Routing Engine, perform the following procedures:
112
Replacing Host Subsystem Components
Power 1
1.2 V
1.5 V
1.8 V
2.5 V
3.3 V
5.0 V
12.0 V
1.25 V
3.3 V SM3
5.0 V RE
12.0 V RE
Power 2
11.3 V bias PEM
4.6 V bias MidPlane
11.3 V bias FPD
11.3 V bias POE 0
11.3 V bias POE 1
Bus Revision
FPGA Revision
Removing a Routing Engine on page 113
Installing a Routing Engine on page 114
1205 mV
1508 mV
1817 mV
2507 mV
3306 mV
5053 mV
12200 mV
1256 mV
3306 mV
5091 mV
0 mV
11214 mV
4821 mV
11350 mV
11350 mV
11330 mV
42
0
or . .
0 1