Table 35: Ac Power System Specifications; Table 36: Ac Power Supply Electrical Specifications - Juniper SRX 5600 Hardware Manual

SRX 5600 Services Gateway Hardware Guide

Table 35: AC Power System Specifications

AC Power Supply Electrical Specifications
Table 36 on page 192 lists the AC power supply electrical specifications. For AC power
system electrical specifications, see Table 35 on page 192.

Table 36: AC Power Supply Electrical Specifications

AC Power Circuit Breaker Specifications
Each AC power supply has a single AC appliance inlet located on the power supply
that requires a dedicated AC power feed. We recommend that you use a customer
site circuit breaker rated for 15 A (250 VAC) minimum for each AC power supply,
or as permitted by local code. Doing so enables you to operate the services gateway
in any configuration without upgrading the power infrastructure.
Power Requirements for AC-Powered Services Gateways
NOTE: If you plan to operate a maximally configured AC-powered services gateway,
we recommend that you provision 33 A @ 100 VAC or 14 A @ 240 VAC for the
system, or 11.0 A @ 200 VAC or 14.5 A @ 110 VAC for each power supply.
If you do not plan to provision 33 A @ 100 VAC or 14 A @ 240 VAC for the system,
or 11.0 A @ 200 VAC or 14.5 A @ 110 VAC for each power supply, you can use the
information in Table 37 on page 193 and Table 38 on page 193 to calculate power
consumption for various hardware configurations, and thermal output.
192
AC Power Specifications and Guidelines
Item Specification
AC input voltage Operating range: 100 - 240 VAC
AC input line frequency 50 to 60 Hz (nominal)
AC system current rating 33 A @ 100 VAC or 14 A @ 240 VAC maximum (11 A per inlet)
Maximum AC input power Low-line configuration: 3285 W
High-line configuration: 3445 W
Item Specification
Maximum output power 1200 W (low line)/ 1700 W (high line)
AC input voltage Operating range: 100 - 240 VAC (nominal)
AC input line frequency 50 to 60 Hz (nominal)
AC input current rating 11.0 A @ 200 VAC or 14.5 A @ 110 VAC maximum