Storing A Card; Figure 39: Do Not Rest The Card On An Edge - Juniper SRX 5600 Hardware Manual

Never carry the card by the faceplate with only one hand.
Do not rest any edge of a card directly against a hard surface (see Figure 39 on page
89).
Do not stack cards.

Figure 39: Do Not Rest the Card on an Edge

If you must rest the card temporarily on an edge while changing its orientation
between vertical and horizontal, use your hand as a cushion between the edge and
the surface.

Storing a Card

You must store a card as follows:
When you store a card on a horizontal surface or in the shipping container, always
place it inside an antistatic bag. Because the card is heavy, and because antistatic
bags are fragile, inserting the card into the bag is easier with two people. To do this,
one person holds the card in the horizontal position with the faceplate facing the
body, and the other person slides the opening of the bag over the card connector
edge.
In the device chassis
In the container in which a spare card is shipped
Horizontally and sheet metal side down
Chapter 11: Maintaining Hardware Components
Handling and Storing Cards
89