Juniper SRX 5600 Hardware Manual page 197

Waarschuwing Het apparaat is ontworpen om te functioneren met TN
energiesystemen.
Varoitus Koje on suunniteltu toimimaan TN-sähkövoimajärjestelmien yhteydessä.
Attention Ce dispositif a été conçu pour fonctionner avec des systèmes d'alimentation
TN.
Warnung Das Gerät ist für die Verwendung mit TN-Stromsystemen ausgelegt.
Avvertenza Il dispositivo è stato progettato per l'uso con sistemi di alimentazione
TN.
Advarsel Utstyret er utfomet til bruk med TN-strømsystemer.
Aviso O dispositivo foi criado para operar com sistemas de corrente TN.
¡Atención! El equipo está diseñado para trabajar con sistemas de alimentación tipo
TN.
Varning! Enheten är konstruerad för användning tillsammans med elkraftssystem
av TN-typ.
AC Power Electrical Safety Guidelines
The following electrical safety guidelines apply to AC-powered services gateways:
AC-powered services gateways are shipped with three-wire electrical cords with
a grounding-type plug that fits only a grounding-type power outlet. Do not
circumvent this safety feature. Equipment grounding should comply with local
and national electrical codes.
Each AC power supply has one AC appliance inlet. Each inlet requires a dedicated
AC power feed and a dedicated circuit breaker. We recommend that you use a
dedicated circuit breaker rated at 15 A (250 VAC) minimum, or as required by
local code. For information about site power requirements, see "Power Guidelines,
Requirements, and Specifications" on page 185. For information about connecting
the services gateway to power and ground, see "Connecting Power to an
AC-Powered Services Gateway" on page 64 and "Chassis Grounding" on page
185.
WARNING: The services gateway is pluggable type A equipment installed in a
restricted-access location. It has a separate protective earthing terminal (sized for
UNC 1/4-20 ground lugs) provided on the chassis in addition to the grounding pin of
the power supply cord. This separate protective earthing terminal must be
permanently connected to earth.
The cores in the mains lead are colored in accordance with the following code:
Green and yellow—Earth
Appendix A: Safety and Regulatory Compliance Information
Safety Guidelines and Warnings
171