Juniper SRX 5600 Hardware Manual page 98

SRX 5600 Services Gateway Hardware Guide
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
72
root@>
Enter configuration mode.
configure
[edit]
root@#
Set the root authentication password by entering either a cleartext password,
an encrypted password, or an SSH public key string (DSA or RSA).
[edit]
root@# set system root-authentication plain-text-password
New password: password
Retype new password: password
Configure an administrator account on the device.
[edit]
root@# set system login user admin class super-user authentication
plain-text-password
Configure the password for the administrator account.
[edit]
root@# set system root-authentication plain-text-password
Commit the configuration to activate it on the device.
[edit]
root@# commit
Log in as the administrative user you configured in step 6.
Configure the name of the device. If the name includes spaces, enclose the name
in quotation marks (" ").
configure
[edit]
admin@# set system host-name host-name
Configure the IP address and prefix length for the device s Ethernet interface.
[edit]
admin@# set interfaces fxp0 unit 0 family inet address address/prefix-length
Configure the traffic interface.
[edit]
admin@# set interfaces ge-6/2/0 unit 0 family inet address address/prefix-length
admin@# set interfaces ge-6/3/5 unit 0 family inet address address/prefix-length
Configure the default route.
[edit]
admin@# set routing-options static route 0.0.0.0/0 next-hop gateway