Laser And Led Safety Guidelines And Warnings; General Laser Safety Guidelines; Class 1 Laser Product Warning; Class 1 Led Product Warning - Juniper SRX 5600 Hardware Manual

Services gateway
Hide thumbs Also See for SRX 5600:
Table of Contents

Advertisement

Warnung Keine Rampen mit einer Neigung von mehr als 10 Grad verwenden.
Avvertenza Non usare una rampa con pendenza superiore a 10 gradi.
Advarsel Bruk aldri en rampe som heller mer enn 10 grader.
Aviso Não utilize uma rampa com uma inclinação superior a 10 graus.
¡Atención! No usar una rampa inclinada más de 10 grados
Varning! Använd inte ramp med en lutning på mer än 10 grader.

Laser and LED Safety Guidelines and Warnings

Some services gateway cards are equipped with laser transmitters, which are
considered a Class 1 Laser Product by the U.S. Food and Drug Administration, and
are evaluated as a Class 1 Laser Product per EN 60825–1 +A11 +A2 requirements.
Observe the following guidelines and warnings:

General Laser Safety Guidelines

When working around PICs, observe the following safety guidelines to prevent eye
injury:
WARNING: Unterminated optical connectors can emit invisible laser radiation. The
lens in the human eye focuses all the laser power on the retina, so focusing the eye
directly on a laser source—even a low-power laser—could permanently damage the
eye.

Class 1 Laser Product Warning

WARNING: Class 1 laser product.
General Laser Safety Guidelines on page 159
Class 1 Laser Product Warning on page 159
Class 1 LED Product Warning on page 160
Laser Beam Warning on page 160
Radiation from Open Port Apertures Warning on page 161
Do not look into unterminated ports or at fibers that connect to unknown sources.
Do not examine unterminated optical ports with optical instruments.
Avoid direct exposure to the beam.
Appendix A: Safety and Regulatory Compliance Information
Safety Guidelines and Warnings
159

Advertisement

Table of Contents
loading

Table of Contents