Table 37: Base System Ac Power Requirements; Table 38: Component Power Requirements - Juniper SRX 5600 Hardware Manual

Table 37 on page 193 lists the power requirements for base AC-powered devices
operating under typical voltage conditions. It includes the efficiency for the AC power
supplies.

Table 37: Base System AC Power Requirements

Component
Low-line nonredundant configuration @ 110 V includes three AC
power supplies, midplane, craft interface, and the fan tray (running
at normal speed)
Low-line redundant configuration @ 110 V includes four AC power
supplies, midplane, craft interface, and the fan tray (running at
normal speed)
High-line nonredundant configuration @ 220 V includes two AC
power supplies, one Routing Engine, one SCB, midplane, craft
interface, and the fan tray (running at normal speed)
High-line redundant configuration @ 220 V includes four AC power
supplies, midplane, craft interface, and the fan tray (running at
normal speed)
Table 38 on page 193 lists the power requirements for various hardware components
when the services gateway is operating under typical voltage conditions.

Table 38: Component Power Requirements

Component
Fan tray (full speed) – Fan tray (normal speed)
SCB
Routing Engine
IOC—Generalized typical value
IOC—Generalized maximum value
SPC—Generalized typical value
SPC—Generalized maximum value
Appendix D: Power Guidelines, Requirements, and Specifications
AC Power Specifications and Guidelines
Power Requirement
(Watts)
455 W (approximate)
585 W (approximate)
410 W (approximate)
745 W (approximate)
Power Requirement (Watts)
110 W – 80 W = 30 W
150 W
90 W
312 W
365 W
213 W
351 W
193