Installation Safety Guidelines And Warnings; Chassis Lifting Guidelines; Installation Instructions Warning - Juniper SRX 5600 Hardware Manual

SRX 5600 Services Gateway Hardware Guide

Installation Safety Guidelines and Warnings

Observe the following guidelines and warnings before and during services gateway
installation:

Chassis Lifting Guidelines

The weight of a fully configured chassis is about 163.5 lb (74.2 kg). Observe these
guidelines for lifting and moving the services gateway:

Installation Instructions Warning

WARNING: Read the installation instructions before you connect the services gateway
to a power source.
Waarschuwing Raadpleeg de installatie-aanwijzingen voordat u het systeem met de
voeding verbindt.
Varoitus Lue asennusohjeet ennen järjestelmän yhdistämistä virtalähteeseen.
Attention Avant de brancher le système sur la source d'alimentation, consulter les
directives d'installation.
Warnung Lesen Sie die Installationsanweisungen, bevor Sie das System an die
Stromquelle anschließen.
154
Safety Guidelines and Warnings
Chassis Lifting Guidelines on page 154
Installation Instructions Warning on page 154
Rack-Mounting Requirements and Warnings on page 155
Ramp Warning on page 158
Before moving the services gateway, read the guidelines in "Preparing the Site
for Services Gateway Installation" on page 37 to verify that the intended site
meets the specified power, environmental, and clearance requirements.
Do not attempt to lift a fully configured services gateway by yourself. Using a
mechanical lift to maneuver the services gateway into a rack is recommended.
If a lift cannot be used, a minimum of two people must lift the services gateway,
and you must remove components from the chassis before lifting. For lifting and
component removal instructions, see "Setting Up the Services Gateway" on page
35.
Before lifting or moving the services gateway, disconnect all external cables.
As when lifting any heavy object, lift most of the weight with your legs rather
than your back. Keep your knees bent and your back relatively straight and avoid
twisting your body as you lift. Balance the load evenly and be sure that your
footing is solid.