Tools And Parts Required; Table 26: Field-Replaceable Units; Table 27: Tools And Parts Required - Juniper SRX 5600 Hardware Manual

SRX 5600 Services Gateway Hardware Guide

Table 26: Field-Replaceable Units

See "Powering Off the Services Gateway" on page 70 for instructions on powering
off the device in order to replace cold-swap-only FRUs.

Tools and Parts Required

To replace hardware components, you need the tools and parts listed in Table 27 on
page 100.

Table 27: Tools and Parts Required

100

Tools and Parts Required

Hot-removable and hot-insertable
FRUs
Air filter
Fan tray
Craft interface
AC and DC power supplies (if
redundant)
SFP and XFP Transcievers
Tool or part
3/8-in. nut driver or pliers
Blank panels (if component is not
reinstalled)
Electrostatic bag or antistatic mat
Hot-pluggable FRUs
I/O cards(IOCs)
Flex I/O cards (flex IOCs)
Port modules
Components
Cables and connectors
DC power supply
SCB
IOC
SPC
Power supply
Routing Engine
Craft Interface
SCB
IOC
SPC
Routing Engine
SFP and XFP Transcievers
Cold-swap-only FRUs
Routing Engine
Switch Control Boards (SCBs)
Services Processing Cards (SPCs)