Removing An Sfp Or Xfp Transceiver; Figure 62: Installing An Spc; Figure 63: Attaching A Cable To An Spc - Juniper SRX 5600 Hardware Manual

Figure 62: Installing an SPC

Figure 63: Attaching a Cable to an SPC

Removing an SFP or XFP Transceiver

Small form-factor pluggable (SFPs) and XFPs are optical transceivers that are installed
in IOCs and SPCs.
SFPs and XFPs are hot-insertable and hot-removable. Removing an SFP or XFP does
not interrupt IOC or SPC functioning, but the removed SFP or XFP no longer receives
or transmits data.
To remove an SFP or XFP transceiver (see Figure 64 on page 132):
1.
2.
Have ready a replacement transceiver or a transceiver slot plug, an antistatic
mat, and a rubber safety cap for the transceiver.
Attach an ESD wrist strap to your bare wrist and connect the wrist strap to one
of the ESD points on the chassis.
Chapter 13: Replacing Hardware Components

Removing an SFP or XFP Transceiver

131