Figure 38: Do Not Grasp The Connector Edge - Juniper SRX 5600 Hardware Manual

SRX 5600 Services Gateway Hardware Guide
To hold a card vertically:
1.
2.
3.
If the card is horizontal before you grasp it, place your left hand around the faceplate
and your right hand along the bottom edge.
To hold a card horizontally:
1.
2.
You can rest the faceplate of the card against your body as you carry it.
As you carry the card, do not bump it against anything. Card components are fragile.
Never hold or grasp the card anywhere except places that this document indicates.
In particular, never grasp the connector edge, especially at the power connector in
the corner where the connector and bottom edges meet (see Figure 38 on page 88).

Figure 38: Do Not Grasp the Connector Edge

88
Handling and Storing Cards
Orient the card so that the faceplate faces you. To verify orientation, confirm
that the text on the card is right-side up and the electromagnetic interference
(EMI) strip is on the right-hand side.
Place one hand around the card faceplate about a quarter of the way down from
the top edge. To avoid deforming the EMI shielding strip, do not press hard on
it.
Place your other hand at the bottom edge of the card.
Orient the card so that the faceplate faces you.
Grasp the top edge with your left hand and the bottom edge with your right hand.