Craft Interface; Alarm Leds And Alarm Cutoff/Lamp Test Button; Host Subsystem Leds; Power Supply Leds - Juniper SRX 5600 Hardware Manual

Figure 14: Cable Management Divider

Figure 15: Cable Management System Installed on the Device

Craft Interface

The craft interface shows you status and troubleshooting information at a glance and
lets you perform many system control functions. It is hot-insertable and
hot-removable. The craft interface is located on the front of the services gateway
above the card cage and contains the following components:
Alarm LEDs and Alarm Cutoff/Lamp Test Button on page 24
Host Subsystem LEDs on page 25
Power Supply LEDs on page 25
IOC and SPC LEDs on page 26
SCB LEDs on page 26
Fan LEDs on page 26
Chapter 2: Hardware Components
23
Craft Interface