Show Errdisable Detect - Cisco Catalyst 2960 Command Reference Manual

Hide thumbs Also See for Catalyst 2960:

Table of Contents

Chapter 2 Catalyst 2960 Switch Cisco IOS Commands

show errdisable detect

Use the show errdisable detect user EXEC command to display error-disabled detection status.

Syntax Description

Command Modes

Command History

Usage Guidelines

Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output

are not displayed, but the lines that contain Output are displayed.

This is an example of output from the show errdisable detect command:

Switch> show errdisable detect

ErrDisable Reason

-----------------

arp-inspection

channel-misconfig

community-limit

dhcp-rate-limit

gbic-invalid

inline-power

invalid-policy

psecure-violation

security-violatio

sfp-config-mismat

storm-control

show errdisable detect [ | {begin | exclude | include} expression]

(Optional) Display begins with the line that matches the expression.

(Optional) Display excludes lines that match the expression.

(Optional) Display includes lines that match the specified expression.

Expression in the output to use as a reference point.

Modification

This command was introduced.

error reason refers to an invalid small form-factor pluggable (SFP) module.

gbic-invalid

Catalyst 2960 Switch Command Reference

show errdisable detect