2 Press the softkey in the second position and use the Entry knob to
3 Press the Settings softkey.
4 Finally, press the Press to Save softkey.
See Also
•
•
•
To save ALB data files
Agilent logic analyzer binary (ALB) format data files can be viewed and
analyzed offline on a PC using the Agilent Logic Analyzer application and
the Agilent B4610A Data Import Tool. See the
B4610A Data Import Tool for Offline Viewing and Analysis Data Sheet
(publication number 5989- 7834EN)".
ALB data files can be saved to an external USB storage device.
1 Press [Save/Recall] > Save > Format; then, turn the Entry knob to select
2 Press the softkey in the second position and use the Entry knob to
3 Press the Settings softkey.
Agilent InfiniiVision 2000 X-Series Oscilloscopes User's Guide
navigate to the save location. See
page 226.
In the File Settings Menu, you have these softkeys and options:
Setup Info — when enabled, setup information (vertical, horizontal,
•
trigger, acquisition, math, and display settings) is also saved in a
separate file with a TXT extension.
Length — sets the number of data points that will be output to the
•
file. For more information, see
Save Seg — when data is acquired to segmented memory, you can
•
specify whether the currently displayed segment is saved or all
acquired segments are saved. (See also
Memory"
on page 158.)
A message indicating whether the save was successful is displayed.
"Binary Data (.bin) Format"
"CSV and ASCII XY files"
"Minimum and Maximum Values in CSV Files"
ALB data (*.alb).
navigate to the save location. See
page 226.
In the File Settings Menu, you have these softkeys and options:
Save/Recall (Setups, Screens, Data)
"To navigate storage locations"
"Length Control"
"Saving Data from Segmented
on page 281
on page 287
"Agilent Technologies
"To navigate storage locations"
on
on page 223.
on page 288
on
17
221