Measurement Window With Zoom Display; Measurement Statistics - Agilent Technologies InfiniiVision 3000 X-Series User Manual

14
Measurements
6 Press the Upper softkey; then, turn the Entry knob to set the upper

Measurement Window with Zoom Display

When the zoomed time base is displayed, you can choose whether
measurements are made in the Main window portion of the display or the
Zoom window portion of the display.
1 Press the [Meas] key.
2 In the Measurement Menu, press the Settings softkey.
3 In the Measurement Settings Menu, press the Meas Window softkey; then,

Measurement Statistics

Press the [Meas] key to enter the Measurement Menu. By default, statistics
are displayed, and frequency and voltage are measured on channel 1.
Select the measurements you desire for the channels you are using (see
"Measurements Summary"
From the Measurement Menu, press the Statistics softkey to enter the
Statistics Menu.
216
measurement threshold value.
Decreasing the upper value below the set middle value will
automatically decrease the middle value to be less than the upper value.
The default upper threshold is 90% or 1.50 V.
If threshold Type is set to %, the upper threshold value can be set
•
from 7% to 95%.
turn the Entry knob to select from:
Auto Select — The measurement is attempted in the lower, Zoom
•
window; if it cannot be made there, the upper, Main window is used.
Main — The measurement window is the upper, Main window.
•
Zoom — The measurement window is the lower, Zoom window.
•
on page 195).
Agilent InfiniiVision 3000 X-Series Oscilloscopes User's Guide