Stand-Alone Node Set-Up - Alcatel-Lucent 1850 Installation And System Turn-Up Manual

5

Stand-alone node set-up

Overview
Purpose
This section provides instructions for installing circuit packs and downloading software.
Contents
This chapter provides information on the following topics
Circuit pack compatibility
Circuit pack installation
Software installation
Use of WaveStar
Safety instructions
Note:
Unterminated optical connectors may emit laser radiation. Do not view beam with
optical instruments.
The operational tests in this section are run only in an out-of-service mode of operation.
Office alarms will normally be connected only during the office alarm test to prevent
constant alarms throughout this section.
............................................................................................................................................................................................................................................................
365-372-403R5.1
Issue 1 November 2008
®
CIT software
All precautions should be observed when handling fiber.
WARNING
Laser hazard
CAUTION
Service disruption hazard
5-2
5-4
5-9
5-10
5 - 1