Table of Contents
Advertisement
Chapter 2
Administrative Commands
shutdown
Use the shutdown command to disable any of the following:
•
•
•
•
Enter the shutdown command in the appropriate configuration submode. To enable any of these
elements, use the no form of this command.
Syntax Description
This command has no arguments or keywords.
Defaults
This command has no default settings.
Command Modes
Card Configuration (config-card) submode, Ethernet Management Interface Configuration
(config-int-mgmt-ethernet) submode, InfiniBand Management Interface Configuration
(config-int-mgmt-ib) submode, Ethernet Interface Configuration (config-if-ether) submode, InfiniBand
Interface Configuration (config-if-ib) submode, Fibre Channel Interface Configuration (config-if-fc)
submode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module
for IBM BladeCenter
Privilege Level:
Unrestricted or card-specific read-write user.
Enabling/Disabling a card:
Before you use the action command on a card, you must enable (bring up) the card. To enable or disable
a card, follow these steps:
Step 1
In User Exec mode, enter the enable command to enter Privileged Exec mode.
Step 2
Enter the configure terminal command to enter Global Configuration mode.
Step 3
Enter the card command and specify the card or cards that you want to enable.
Step 4
Enter the shutdown command or the no shutdown command to disable or enable the cards that you
specified in the previous step.
OL-9163-02
A specific interface card or port
An Ethernet Management port
An InfiniBand Management port
A power supply
shutdown
no shutdown
Cisco SFS 7000 Series Product Family Command Reference Guide
shutdown
2-63
Advertisement
Table of Contents
