Table of Contents
Advertisement
Chapter 6
Show Commands
Examples
The following example displays the completed and ongoing diagnostic tests on port 1 of InfiniBand
switch card 16:
SFS-7000P> show diagnostic interface ib 16/1
================================================================================
================================================================================
Passed=0, Failed=0, Total=0
The following example displays the available diagnostics tests:
SFS-7000P(config)# diagnostic interface ib 16/1
> SFS-7000P(config-diag-if-ib-16/1)# ?
> diagnostic Configuration Commands:
>
data-pattern
> cases
>
exit
>
help
>
history
>
iterations
> should be run
>
no
>
start
>
stop
>
test
>
validate
> received packets
> SFS-7000P(config-diag-if-ib-16/1)# test ?
>
ext-cable
>
ext-loopback
>
int-loopback
Related Commands
show diagnostic
OL-9163-02
Diagnostic Tests For IB Interfaces
test : external-loopback
port : 16/1
validation : enabled
data-size : 0
data-pattern : 00:00:00:00
iterations : 0
source-id : 00:00:00
target-id : 00:00:00
action : stop
result : none
percentage-completed : 0
result-string : External Loopback Test Unknown status, Current report :
- Configure a data pattern to use in traffic test
- Exit current mode
- Show command help
- Show command history
- Configure number of iterations the test case
- Disable a configuration or set default
- Initiate a test
- Stop a test
- Configure the test case to run
- Enable data validation to be performed on
- Configure External-Cable test
- Configure External-Loopback test
- Configure Internal-Loopback test
Cisco SFS 7000 Series Product Family Command Reference Guide
show diagnostic interface ib
6-45
Advertisement
Table of Contents
