Table of Contents
Advertisement
Chapter 6
Show Commands
Table 6-39
Field
base-version
class-version
type
num-ports
port-guid
partition-cap
device-id
revision
local-portnum
vendor-id
system-image-guid
Examples
The following example (output abridged) displays the configuration of all the nodes on all the subnets
on the InfiniBand fabric:
SFS-7000P# show ib sm node subnet-prefix fe:80:00:00:00:00:00:00
================================================================================
================================================================================
OL-9163-02
show ib sm node Command Field Descriptions (continued)
Description
Supported base management datagram (MAD) version. Indicates that this
channel adapter, switch, or router supports versions up to and including this
version. See section 13.4.2, Management Datagram Format, in InfiniBand
Architecture®, Vol. 1, Release 1.1, for more information.
Supported MAD class format version. Indicates that this channel adapter,
switch, or router supports versions up to, and including, this version.
Type of node being managed. The value appears as channel adapter, switch,
router, or error. An error entry indicates an unknown type.
Number of physical ports on the node.
Guide of the port that connects the node to the Server Switch. A port within a
node can return the node GUID as its PortGUID if the port serves as an integral
part of the node and you cannot replace the port in the field (not swappable).
Capacity of entries in the partition table for channel adapter, router, and the
switch management port. The value appears the same for all ports on the node.
This defaults to at least 1 for all nodes including switches. You cannot
configure this value.
Manufacturer-assigned device identification.
Manufacturer-assigned device revision.
The link port number from which this subnet management packet (SMP)
arrived. The value appears the same for all ports on the node.
Device vendor ID. The value appears the same for all ports on the node.
Guide of an associated supervisory node. No supervisory node exists if the
command output displays 00:00:00:00:00:00:00:00.
Subnet Management Nodes
subnet-prefix : fe:80:00:00:00:00:00:00
node-guid : 00:00:2c:90:01:1b:ba:80
description : swfc5 HCA-1 (Topspin HCA)
base-version : 1
class-version : 1
type : channel adapter
num-ports : 2
port-guid : 00:00:2c:90:01:1b:ba:81
partition-cap : 64
device-id : 0
revision : 0
local-portnum : 1
vendor-id : 00:2c:90
system-image-guid : 00:00:00:00:00:00:00:00
Cisco SFS 7000 Series Product Family Command Reference Guide
show ib sm node
6-111
Advertisement
Table of Contents
