Table of Contents
Advertisement
Chapter 6
Show Commands
show fc srp target
To display the properties of targets (that you manually configured or that your Server Switch
discovered), enter the show fc srp target command in User Exec mode or Privileged Exec mode.
Syntax Description
wwpn
Defaults
This command has no default settings.
Command Modes
User Execute mode, Privileged Execute mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 3012
Privilege Level:
Fibre Channel read-only user.
Enter this command without any arguments to display all target devices known to the Server Switch.
Table 6-27
Table 6-27
Field
wwpn
wwnn
description
ioc-guid
service-name
protocol-ids
fc-address
mtu
connection-type Displays "down" if the connection cannot pass traffic. Displays "nl-port" when the
physical -access Fibre Channel port that physically connects to the target.
OL-9163-02
show fc srp target [wwpn]
(Optional) World-wide port name (WWPN) of the target port.
describes the fields in the show fc srp target command output.
show fc srp target Command Field Descriptions
Description
Fibre Channel interface port name of the SRP target.
World-wide node name of the target.
Text label used to identify the service in the Element Manager GUI or CLI output. If
you do not apply a description, the system defaults to the service name.
InfiniBand I/O controller (IOC) through which the initiator accesses the target. On
the Cisco SFS 3012 and Cisco SFS 3001 platforms, the IOC identifies a Fibre
Channel gateway slot.
Name of the service to associate with the target.
Protocols that the target supports.
3-byte Fibre Channel Protocol address of the target.
Maximum transmission unit, in bytes, of the target.
target communicates with the virtual port on the Fibre Channel gateway.
Cisco SFS 7000 Series Product Family Command Reference Guide
show fc srp target
6-71
Advertisement
Table of Contents
