Table of Contents
Advertisement
show interface gateway
show interface gateway
To display attributes of the internal InfiniBand gateway ports of Fibre Channel and Ethernet expansion
modules, enter the show interface gateway command in User Exec mode or Privileged Exec mode.
Syntax Description
slot-selection
fc srp initiator-target
guid
extension
ip
ip-backup
ip-address
all
sma
node-info
port-info
details
statistics
Defaults
This command has no default settings.
Command Modes
User Execute mode, Privileged Execute mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3012, Cisco SFS 3001
Privilege Level:
Fibre Channel read-only user.
Use this command to troubleshoot connectivity issues. Verify that the show output matches the
configuration file.
Cisco SFS 7000 Series Product Family Command Reference Guide
6-162
show interface gateway slot-selection [fc srp initiator-target guid extension | {ip |
ip-backup} {ip-address | all} | sma {node-info | port-info [details]}| statistics]
Internal gateway port that you want to view.
(Optional) Displays FC targets that an initiator can access.
(Optional) GUID of the initiator.
(Optional) GUID extension of the initiator.
(Optional) Displays attributes of IP addresses on the card.
Displays attributes of backup IP addresses on the card.
Individual IP address with the attributes that you want to view.
Displays attributes of all addresses.
Displays SMA information.
Displays SMA node information
Displays SMA port information.
(Optional) Displays detailed SMA port information.
(Optional) Displays gateway statistics of the card.
Chapter 6
Show Commands
OL-9163-02
Advertisement
Table of Contents
