Table of Contents
Advertisement
Chapter 6
Show Commands
show system-services
Use this command to discover which system services (for example, telnet, ftp, and syslog) run on your
Server Switch. You can configure any or all of these services to manage your Server Switch.To display
system services such as FTP and telnet, enter the show system-services command in User Exec mode
or Privileged Exec mode.
Syntax Description
This command has no arguments or keywords.
Defaults
This command has no default settings.
Command Modes
User Execute mode, Privileged Execute mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012
Privilege Level:
Unrestricted read-write user.
Examples
The following example displays the system services that run on the Server Switch:
SFS-7000P# show system-services
================================================================================
================================================================================
================================================================================
================================================================================
Press any key to continue (Q to quit)
Related Commands
ftp-server enable
history
radius-server
snmp-server
ntp
hostname
OL-9163-02
show system-services
ftp service : disabled
telnet service : enabled
syslog-server-one : 0.0.0.0
syslog-server-two : 0.0.0.0
date : 03/29/06
time : 17:01:35
server-one : 0.0.0.0
server-two : 0.0.0.0
System Services
NTP Information
Cisco SFS 7000 Series Product Family Command Reference Guide
show system-services
6-205
Advertisement
Table of Contents
