Table of Contents
Advertisement
Chapter 6
Show Commands
show fc srp itl
To display all ITLs that run through your Server Switch, enter the show fc srp itl command in User
Exec mode or Privileged Exec mode.
Syntax Description
guid
extension
wwpn
LUN
Defaults
Enter the show fc srp itl command with not arguments to display all ITLs on your Server Switch.
Command Modes
User Execute mode, Privileged Execute mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 3012
Privilege Level:
Unrestricted read-write user.
Enter this command without arguments to display the ITL information for all connected Fibre Channel
devices. This command displays active and inactive ITLs.
Table 6-23
Table 6-23
Field
guid
extension
target-wwpn
fc-lunid
description
srp-lunid
logical-id (raw 64 bytes)
logical-id (formatted display)
OL-9163-02
show fc srp itl [guid extension wwpn LUN]
(Optional) Global unique identifier (GUID) of the initiator.
(Optional) GUID extension of the initiator.
(Optional) World-wide port name (WWPN) of the target port on the FC
storage device.
(Optional) Logical unit number (LUN) of the FC storage device.
describes the fields in the show fc srp itl command output.
show fc srp itl Command Field Descriptions
Description
GUID of the initiator.
GUID extension of the initiator.
WWPN of the target port on the FC storage device.
Fibre Channel LUN ID of the storage disk/tape/stripe.
User-configured description.
Internal SRP LUN ID. This value serves as a SRP-side alias
for a FC LUN ID. By default, the srp-lunid value matches the
LUN variable.
Numeric disk LU.
Alphanumeric disk LU.
Cisco SFS 7000 Series Product Family Command Reference Guide
show fc srp itl
6-61
Advertisement
Table of Contents
