Table of Contents
Advertisement
Chapter 6
Show Commands
show diagnostic card
To display completed or ongoing diagnostic tests for cards, enter the show diagnostic card command
in User Exec mode or Privileged Exec mode.
Syntax Description
all
card-selection
Defaults
This command has no default settings.
Command Modes
User Execute mode, Privileged Execute mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module
for IBM BladeCenter
Privilege Level:
Unrestricted read-write user.
Command Output:
Table 6-10
Table 6-10
Field
test
slot-id
iterations
action
result
percentage-completed
result-string
Examples
The following example displays the completed and ongoing diagnostic tests on card 3:
SFS-7000P# show diag card 3
================================================================================
================================================================================
OL-9163-02
show diagnostic card {all | card-selection}
Specifies all cards on the Server Switch.
Card or cards with the tests that you want to view.
describes the fields in the show diagnostic card command.
show diagnostic card Command Field Descriptions
Description
Test that ran or runs on the card.
Slot of the card.
Number of iterations that the test completed.
Last action that an administrator applied to the test.
Result of the last action that an administrator applied to the test.
Percentage of the test that has executed.
Diagnostic test results.
Diagnostic Tests For Cards
Cisco SFS 7000 Series Product Family Command Reference Guide
show diagnostic card
6-33
Advertisement
Table of Contents
