Table of Contents
Advertisement
show system-mode
show system-mode
Use this command to verify that the SRP configuration is locked or unlocked. To display the current
system mode (normal or VFrame), enter the show system-mode command in User Execute mode or
Privileged Execute mode.
Syntax Description
This command has no arguments or keywords.
Defaults
This command has no default settings.
Command Modes
User Execute mode, Privileged Execute mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module
for IBM BladeCenter
Privilege Level:
Unrestricted read-write user.
Examples
The following example indicates that the Server Switch is in its default unlocked mode:
SFS-7000P# show system-mode
================================================================================
================================================================================
Related Commands
system-mode
Cisco SFS 7000 Series Product Family Command Reference Guide
6-204
show system-mode
oper-mode : normal
System Operation Mode
Chapter 6
Show Commands
OL-9163-02
Advertisement
Table of Contents
