Table of Contents
Advertisement
show interface ethernet
Table 6-59
Field
carrier-sense-errors
frame-too-longs
internal-mac-receive-errors
Examples
The following example shows the general information about a specific IP address on an Ethernet
interface port:
SFS-7000P# show inter ether 4/1 ip 10.3.22.4
======================================================================
======================================================================
port
----------------------------------------------------------------------
4/1
SFS-7000P#
The following examples displays statistical data regarding the IP transactions of all the IP addresses on
an interface port. Statistical data is comprised of transmission errors, requests, discards, packet
fragments, and so on.
SFS-7000P# show inter ether 4/1 ip all ip-info
======================================================================
======================================================================
Cisco SFS 7000 Series Product Family Command Reference Guide
6-154
statistics Keyword Output Field Descriptions (continued)
Description
Number of times that the carrier sense condition was lost or never
asserted when attempting to transmit a frame on a particular interface.
The count represented by an instance of this object is incremented at
most once per transmission attempt, even if the carrier sense condition
fluctuates during a transmission attempt. This counter does not
increment when the interface is operating in full-duplex mode.
A count of frames received on a particular interface that exceed the
maximum permitted frame size. The count represented by an instance
of this object is incremented when the frame-too-longs status is returned
by the MAC service to the LLC (or other MAC user). Received frames
for which multiple error conditions obtain are counted exclusively
according to the error status presented to the LLC.
A count of frames for which reception on a particular interface fails due
to an internal MAC sublayer receive error. A frame is only counted by
an instance of this object if it is not counted by the corresponding
instance of the frame-too-longs, alignment-errors, or fcs-errors object.
The precise meaning of the count represented by an instance of this
object is implementation-specific. In particular, an instance of this
object may represent a count of receive errors on a particular interface
that is not otherwise counted.
IP Address Table
address
mask
10.3.22.4
255.255.255.0
IP Information
port : 4/1
default-ttl : 0
in-receives : 0
in-hdr-errors : 0
in-addr-errors : 0
forw-datagrams : 0
in-unknown-protos : 0
in-discards : 0
in-delivers : 0
bcast-addr reasm
type
format
max-size
1
0
primary
Chapter 6
Show Commands
status
active
OL-9163-02
Advertisement
Table of Contents
