Table of Contents
Advertisement
show ib sm configuration
show ib sm configuration
To display information about the subnet managers on your InfiniBand fabric, enter the
show ib sm configuration command in User Exec mode or Privileged Exec mode.
Syntax Description
subnet-prefix
prefix
all
summary
Defaults
This command has no default settings.
Command Modes
User Execute mode, Privileged Execute mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module
for IBM BladeCenter
Privilege Level:
InfiniBand read-only user.
Command Output:
Table 6-34
Table 6-34
Field
subnet-prefix
guid
priority
Cisco SFS 7000 Series Product Family Command Reference Guide
6-96
show ib sm configuration {subnet-prefix prefix | all} [summary]
Specifies the subnet prefix of subnet manager that you want to view.
Subnet prefix of the subnet manager that you want to view.
The current CLI can only report the local subnet manager configuration data.
Therefore, the subnet-prefix value of 'all' is just an alias to the subnet value
of the subnet manager local to the CLI.
(Optional) Displays an abridged form of the command output. The abridged
information includes the subnet prefix, GUID, priority, and subnet manager
key of the subnet managers.
describes the fields in the show ib sm configuration command output.
show ib sm configuration Command Field Descriptions
Description
64-bit value used that identifies the InfiniBand subnet. This is a unique subnet
identifier joins with the GUID to form the global identifier (GID) of the port.
Each GIDs within a subnet has the same subnet prefix.
GUID of this subnet manager.
User-assigned priority for this subnet manager. You must enter an integer
between 0 and 15. The value defaults to 10.
Note
When the chassis boots, the subnet manager priority defaults to 10.
When you add the subnet manager manually, the priority defaults to 10.
Chapter 6
Show Commands
OL-9163-02
Advertisement
Table of Contents
