Table of Contents
Advertisement
Chapter 2
Administrative Commands
telnet
To enable or disable telnet services on your Server Switch, enter the telnet command in Privileged Exec
mode.
Syntax Description
This command has no arguments or keywords.
Defaults
By default, telnet services run on your Server Switch.
Command Modes
Global Configuration (config) mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module
for IBM BladeCenter
Privilege Level:
Unrestricted read-write access.
Disable the telnet feature to restrict access to your Server Switch to SSH only. Your Server Switch
supports two concurrent telnet log-ins (in addition to the Serial log-in, if applicable).
Examples
The following example enables telnet access to the Server Switch:
SFS-7000P(config)# telnet enable
Related Commands
ftp-server enable
history
more
show interface mgmt-ib
show system-services
OL-9163-02
telnet {enable | disable}
Cisco SFS 7000 Series Product Family Command Reference Guide
telnet
2-73
Advertisement
Table of Contents
