Table of Contents
Advertisement
Chapter 6
Show Commands
Table 6-73
Field
out-multicast-pkts
out-broadcast-pkts
out-discards
out-errors
Examples
The following example shows the output of the show interface ib command without the sma or
statistics keywords:
SFS-270# show interface ib 4/7
================================================================================
================================================================================
auto-negotiate-supported : yes
OL-9163-02
statistics Keyword Output Field Descriptions (continued)
Description
Total number of packets that higher-level protocols requested be transmitted and
that were addressed to a multicast address at this sub-layer, including those that
were discarded or not sent.
Total number of packets that higher-level protocols requested to be transmitted
and that were addressed to a broadcast address at this sub-layer, including those
that were discarded or not sent.
Number of outbound packets that were chosen to be discarded even though no
errors had been detected to prevent their being transmitted. One possible reason
for discarding such a packet could be to free-up buffer space.
For packet-oriented interfaces, the number of outbound packets that could not be
transmitted because of errors. For character-oriented or fixed-length interfaces,
the number of outbound transmission units that could not be transmitted because
of errors.
InfiniBand Interface Information
port : 1
name : 1
type : ib4xTXP
desc : 1 (65)
last-change : none
mtu : 0
auto-negotiate : disabled
admin-status : up
oper-status : down
admin-speed : 10gbps
oper-speed : unknown
link-trap : enabled
phy-state : polling
dongle-type : ib4xFX
Cisco SFS 7000 Series Product Family Command Reference Guide
show interface ib
6-175
Advertisement
Table of Contents
