Table of Contents
Advertisement
show interface ib
Table 6-71
Field
mkey
gid-prefix
lid
capability-mask 32-bit bitmask that specifies the supported capabilities of the port. A bit value of 1
state
Table 6-72
show interface ib command.
Table 6-72
Field
node-guid
port
mkey
gid-prefix
lid
master-sm-lid
Cisco SFS 7000 Series Product Family Command Reference Guide
6-170
sma port-info Keyword Output Field Descriptions
Description
64-bit management key for this port. See section 14.2.4, Management Key and 3.5.3,
Keys, InfiniBand Architecture®, Vol. 1, Release 1.1, for more information.
64-bit global ID prefix for this port. This prefix is assigned by the subnet manager,
based upon the port router and the rules for local identifiers. See section 4.1.3, Local
Identifiers, InfiniBand Architecture®, Vol. 1, Release 1.1, for more information.
16-bit base-LID of this port.
(one) indicates a supported capability. The bits are 0, 11-15, 18, 21-31 (Reserved and
always 0.), 1 IsSM, 2 IsNoticeSupported, 3 IsTrapSupported, 4 IsResetSupported, 5
IsAutomaticMigrationSupported, 6 IsSLMappingSupported, 7 IsMKeyNVRAM
(supports M_Key in NVRAM), 8 IsPKeyNVRAM (supports P_Key in NVRAM), 9
Is LED Info Supported, 10 IsSMdisabled, 16 IsConnectionManagementSupported,
17 IsSNMPTunnelingSupported, 19 IsDeviceManagementSupported, 20
IsVendorClassSupported.Values are expressed in hexadecimal.
A higher form of addressing than PhyState, state determines that the nodes can
actually communicate and indicates the state transition that has occurred. A
transition is a port change from down to "initialize", "initialize" to "down," "armed"
to "down," or active to down as a result of link state machine logic. Changes to the
port state resulting from SubnSet have no affect on this parameter value. The value
is noStateChange, down, initialize, armed, or active.
describes the fields that appear when you use the sma port-info details argument with the
sma port-info details Keyword Output Field Descriptions
Description
GUID of the InfiniBand host that connects to the port.
Host port that connects to your Server Switch.
64-bit management key for this port. See section 14.2.4, Management Key
and 3.5.3, Keys, InfiniBand Architecture®, Vol. 1, Release 1.1, for more
information.
64-bit global ID prefix for this port. This prefix is assigned by the subnet
manager, based upon the port router and the rules for local identifiers. See
section 4.1.3, Local Identifiers, InfiniBand Architecture®, Vol. 1, Release
1.1, for more information.
16-bit base-LID of this port.
16-bit base LID of the master subnet manager managing this port.
Chapter 6
Show Commands
OL-9163-02
Advertisement
Table of Contents
