Terminal - Cisco SFS7000P-SK9 - SFS InfiniBand Server Switch 7000 Command Reference Manual

Command reference
Table of Contents

Advertisement

terminal

terminal

To configure
enter the terminal length command in User Exec mode or Privileged Exec mode. To restore these
settings to default values, use the no form of this command.
Syntax Description
length
number-of-lines
time-out
minutes
Defaults
By default, the CLI displays 24 lines per screen.
By default, your Server Switch logs you out after 15 minutes of inactivity.
Command Modes
User Execute mode, Privileged Execute mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module
for IBM BladeCenter
Privilege Level:
General read-only user.
Cisco SFS 7000 Series Product Family Command Reference Guide
2-74
the maximum number of lines that appear on the terminal screen when you enter commands that
display multiple lines of output,
the duration of idle time that triggers your Server Switch to automatically log you out and end your
CLI session
terminal {length number-of-lines | time-out minutes}
terminal no {length | time-out}
Specifies the number of lines that appear on the screen when you run
commands such as the more command an on-line help (?).
Number (integer) of lines that appear on the screen when you run commands
such as the more command. Enter 0 to disable paging and display all output
at once.
Specifies the amount of idle time that your Server Switch allows before it
logs a user out of the CLI.
Number of minutes (integer ranging from 1 to 100000) of idle time that
prompts your Server Switch to end your CLI session and log you out.
length
A number-of-lines value of 0 turns off paging and displays data on the screen without stopping until
completed. We recommend that you set the terminal page length to 0 when you use the show logging
command with the end argument. Otherwise, you will have to keep pressing the space bar to continue
each time the maximum display length prints. The no form of this command resets the terminal length
to the default.
Chapter 2
Administrative Commands
OL-9163-02

Advertisement

Table of Contents
loading

Table of Contents