Table of Contents
Advertisement
Chapter 6
Show Commands
show snmp
To display the SNMP receivers for link traps on your Server Switch, enter the show snmp command in
User Exec mode or Privileged Exec mode.
Syntax Description
user
user-name
Defaults
This command has no default settings.
Command Modes
User Execute mode, Privileged Execute mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module
for IBM BladeCenter
Privilege Level:
Unrestricted read-write user.
Use this command to verify the SNMP servers that you configure with the snmp-server command.
Examples
The following example displays the SNMP trap receivers configured on the Server Switch:
SFS-270# show snmp
================================================================================
================================================================================
================================================================================
================================================================================
ipaddr
----------------------------------------------------------------------
OL-9163-02
show snmp [user {all | user-name}]
(Optional) Displays SNMP information for all users or for one particular
user if you specify that user with the user-name variable.
(Optional) User with the SNMP information that you want to display.
contact : support@topspin.com
location : 515 Ellis Street, Mountain View, CA 94043
version
SNMP Information
Trap Receivers
community
recv-events
Cisco SFS 7000 Series Product Family Command Reference Guide
show snmp
6-201
Advertisement
Table of Contents
