Table of Contents
Advertisement
show ib-agent channel-adapter
show ib-agent channel-adapter
'To view the attributes of InfiniBand agents for channel adapters (gateways and controllers) on your
Server Switch, enter the show ib-agent channel-adapter command in Privileged Exec mode or User
Exec mode.
Syntax Description
node-info
Defaults
This command has no default settings.
Command Modes
User Execute mode, Privileged Execute mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module
for IBM BladeCenter
Privilege Level:
InfiniBand read-only user.
Each system channel adapter runs its own subnet-management agent.
Command Output:
Table 6-47
Table 6-47
Field
guid
type
lid
base-version
class-version
port-guid
partition-cap
device-id
revision
local-port-num
vendor-id
Cisco SFS 7000 Series Product Family Command Reference Guide
6-134
show ib-agent channel-adapter node-info
InfiniBand information for the channel adapter (CA).
describes the fields in the show ib-agent channel-adapter command output.
show ib-agent channel-adapter Command Field Descriptions
Description
Globally unique identifier of the CA as an 8-byte string.
Type of device this SMA supports. The field always displays "adapter."
LID of the channel-adapter port.
Supported base management datagram version supported.
Supported subnet-management class.
Globally unique identifier of the node port.
Number of entries in the partition table for channelAdapter, router, and switch
management ports. This displays, at a minimum, 1 for all nodes including switches.
Device ID information, as assigned by the device manufacturer.
Device revision, as assigned by the device manufacturer.
Number of the link port which received this request; otherwise, the field displays 0.
Device vendor, per the IEEE standard.
Chapter 6
Show Commands
OL-9163-02
Advertisement
Table of Contents
