Table of Contents
Advertisement
system ib-counter-reset
system ib-counter-reset
To disable the regular resetting of IB port counters on your server switch, enter the system
ib-counter-reset command in Global Configuration mode. To reenable the regular resetting of IB port
counters on your server switch, use the no form of this command.
Syntax Description
This command has no arguments or keywords.
Defaults
Counter resetting is enabled.
Command Modes
Global Configuration mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module
for IBM BladeCenter
Privilege Level:
Unrestricted and general read-write user.
'Use the system ib-counter-reset command to enable or disable the regular resetting of IB port
counters. This is a global, chassis-wide setting that allows you to stop all IB port agents from resetting
the IB port counters.
Examples
'The following example disables the regular resetting of IB port counters:
SFS-7000P(config)# no system ib-counter-reset
Cisco SFS 7000 Series Product Family Command Reference Guide
2-72
system ib-counter-reset
no system ib-counter-reset'
Chapter 2
Administrative Commands
OL-9163-02
Advertisement
Table of Contents
