Table of Contents
Advertisement
Chapter 2
Administrative Commands
broadcast
To send text messages to all other CLI users, enter the broadcast command in User Exec mode or
Privileged Exec mode.
Syntax Description
message
Defaults
This command has no default settings.
Command Modes
User Execute mode, Privileged Execute mode.
Usage Guidelines
Platform Availability:
Cisco SFS 3001, Cisco SFS 7000, Cisco SFS 7008, Cisco SFS 3012, Cisco 4x InfiniBand Switch Module
for IBM BladeCenter
Privilege Level:
Unrestricted read-write user.
Multi-word messages must begin and end with quotation marks (","). Single-word messages do not
require quotation marks.
You can broadcast a message to warn other CLI users about events that may impact their sessions, such
as a network outage or major configuration change. A broadcast message appears on every active CLI
session on the Server Switch, including the user who sends the message.
Examples
The following example prints "FC card 5 going down in 10 minutes" to the terminal screens of all users
on the Server Switch:
SFS-7000P# broadcast "FC card 5 going down in 10 minutes."
Related Commands
reload
who
write
OL-9163-02
broadcast message
Message to broadcast. This message may consist of one or more words and
may include any alphanumeric character or symbol (except for quotation
marks).
Cisco SFS 7000 Series Product Family Command Reference Guide
broadcast
2-11
Advertisement
Table of Contents
